BB-VESR90x Serial Servers
5
SERIAL PORT LEDS
Model BB-VESR901 serial server features one serial port.
Model BB-VESR902D features two serial ports. Each serial port has an
associated LED. Serial Port LEDs blink (green) when data is being
transmitted or received on the serial port. When the LED is On, it
indicates the serial port is open.
MODE SWITCH
A recessed momentary reset switch is located on the top of the
enclosure. To activate the switch, insert a small plastic tool through the
hole in the enclosure and press lightly.
Top View of the Serial Server
The Mode switch can be used to:
•
Initiate a Hardware Reset
•
Enter Console Mode
•
Reload factory defaults
Note: Refer to Section 3. Serial Server Setup and Connections for
more information on using the Mode switch.
ETHERNET CONNECTOR
BB-VESR90x models using 10BaseT/100BaseTX (RJ45) connect to a
standard Ethernet network drop using a straight-through RJ45 (male)
Ethernet cable.
