BB-VESR90x Serial Servers
20
DATA/PARITY/STOP
The number of
Data
bits, type of
Parity
and number of
Stop
bits
selected define the serial port parameters at which the serial server will
operate. These parameters must be configured to match the parameters
set on the serial device connected to the serial server's serial port.
•
Data Bits
controls the number of bits of data in each character.
Options include 5, 6, 7 or 8 data bits.
•
Parity
controls the error checking mode. Options are No Parity,
Odd, Even, Mark or Space.
•
Stop Bits
controls the number of bits to indicate the end of a
character. Options include 1, 1.5 and 2. (1.5 bits is only valid
when 5 data bits is selected, which is rare. The 2 stop bits setting
is only valid when 6, 7 or 8 data bits is selected.)
DEFAULT GATEWAY
The
Default Gateway
address sets the default route to remote networks,
enabling users to access the serial server from outside the local network.
DELIMITER 1
Delimiter 1
is a
start delimiter.
The range of ASCII values is 0 through
255.
DELIMITER 2
Delimiter 2
is an
end delimiter
. The range of ASCII values is 0 through
255.
DELIMITER REMOVAL
Delimiter Removal
controls removing of Delimiter 1 and Delimiter 2 from
the received characters before the received characters are sent to the
network.
