VESR9xx Serial Servers
6
MODE SWITCH
A recessed momentary reset switch is located on the top of the
enclosure. To activate the switch, insert a small plastic tool through the
hole in the enclosure and press lightly.
Top View of the Serial Server
The Mode switch can be used to:
•
Initiate a Hardware Reset
•
Enter Console Mode
•
Reload factory defaults
Note: Refer to Section 3. Serial Server Setup and Connections for
more information on using the Mode switch.
ETHERNET CONNECTOR
VESR9xx models using 10BaseT/100BaseTX (RJ45) connect to a
standard Ethernet network drop using a straight-through RJ45 (male)
Ethernet cable. VESR922T has a second RJ45 receptacle that acts an
Ethernet pass-through connection that functions similar to an Ethernet
switch and allows the connection of other devices to the network.
Ethernet Connector
Note:
Refer to Appendix D for connection pin-outs.
Содержание BB-VESR9 Series
