BB-USR604
10
•
Configure the DIP switches for each port to select one of the following:
•
RS-232 (both DIP switches Off)
•
RS-422 (both DIP switches On)
•
RS-485 4-wire (SW1 Off, SW2 On)
•
RS-485 2-wire (SW1 On, SW2 Off)
7.
Connect the serial ports
(see "
Connecting to the Serial Ports
" on page 17):
•
Connect from the DB-9M connectors on the converter to your devices or network:
•
To connect to an RS-232 DTE device, use a null modem (crossover) cable.
•
To connect to an RS-485 two-wire network, refer to
RS-485 Two-Wire Connections
(on page 37).
•
To connector an RS-422 device, or an RS-485 four-wire network, refer to
RS-422 and RS-485
Four-Wire Connections
(on page 38).
8.
Configure the serial ports
(see "
Advanced Settings in Device Manager
" on page 23).
•
On the PC screen, open the Control Panel.
•
Click System to open the Device Manager.
•
Under Ports, double-click the port to be configured.
•
On the Serial Port Properties window, set the required communications parameters of the system
with which you are communicating.
•
If necessary, click Advanced and set up the Advanced Properties (refer to manual for information).
9.
Perform a loopback test to verify that the converter is working.
•
Refer to the
Loopback Test
(on page 33) section.
Содержание BB-USR604
