Advantech B+B SmartWorx IMcV-Giga-FiberLinX-III Скачать руководство пользователя страница 43

Страница: 43 / 68

iMcV-Giga-FiberLinX-III

APPENDIX A: IVIEW

MANAGEMENT SOFTWARE

iView² is the management software that features a Graphical User Interface

(GUI) and gives network managers the ability to monitor and control the

manageable B+B SmartWorx products.
iView² is available in several versions: including a WebServer version 3.0, and

can also function as a snap-in module for HP OpenView Network Node Manager

and other third party SNMP Management software.
iView

supports these O/S platforms: Windows 2000, XP, Vista, 7.

See the

SNMP Management Module

manual for software configuration options.

IVIEW

(ICONFIG VIEW)

iView

(iConfig view) is an in-band utility used for SNMP configuration for B+B

SmartWorx’ SNMP-manageable devices. The iView

(iConfig view) feature allows

the following to be performed:

•

Set an IP address, subnet mask and default gateway.

•

Define community strings and SNMP Traps.

iView

(iConfig view) also includes an authorized IP address system and

restricted access to MIB groups which are supported by B+B SmartWorx'

manageable devices. These extra layers of security do not affect SNMP

compatibility. iView

(iConfig view) can upload new versions of the system

software and new MIB information. It also includes diagnostic capabilities for

faster resolution of technical support issues.

USING IVIEW

iView² is management software that provides network management in an easy to

use GUI. Once iView² is installed on a network management PC using a

Windows operating system, use the Start menu to access iView².

NOTE

Windows SNMP services must be installed to receive Traps.

The autoscan feature of iView² will detect B+B SmartWorx devices on an

active subnet and list them in the network outline. Click the connection for

the iMcV-Giga-FiberLinX-III to open its iView² screen. To perform additional

configuration, select the iView

iConfig view icon on the toolbar in iView².

This allows a session to be launched; the default password/username is

admin/admin

. Additional private usernames and passwords can be entered

in the USERS tab. If the list of passwords is not maintained, the usernames

and passwords can be reset by opening a CLI session and typing in the

cleandb command. This will reset all but the IP address of the device.

Содержание B+B SmartWorx IMcV-Giga-FiberLinX-III





































































Результаты поиска

Содержание B+B SmartWorx IMcV-Giga-FiberLinX-III

Отзывы:

Бренды по названию

Популярные бренды

Advantech B+B SmartWorx IMcV-Giga-FiberLinX-III, Руководство пользователя

Результаты поиска

Содержание B+B SmartWorx IMcV-Giga-FiberLinX-III

Отзывы:

Бренды по названию

Популярные бренды