Product Overview
Attach the Antenna
1
Connect the Antenna to the antenna connector located on
the side of the device.
LAN
Port
Power
Port
Antenna
LEDs
Antenna
Port
Detachable
Terminal Block
Connect Ethernet
2
Connect a Cat5 Ethernet cable between the device and an
Ethernet port on a host computer.
Connect Power Supply
3
Connect the 5-36 VDC terminal block attachment or use
an AC power supply (optional).
Connect To The Device
4
Run the Airborne Management Center (AMC) application.
If you don’t currently have AMC installed, you can install
it from the included CD or download and install it from
the B+B SmartWorx website. Just search for the model
number and follow the links to download software from the
Downloads section of the product page.
Note: You may be required to wait up to 180 seconds before
the device is discovered and displayed.
When AMC starts, it will request a login:
Select Group Name: “manuf” and enter Group Password:
“dpac”
AMC will load and discover the attached device:
Manage The Device
5
AMC will ask if you want to manage the new device,
select ‘Yes’:
Select ‘Yes’ to indicate device is using Factory Default
settings:
AMC will display the found Airborne device(s):
Right click the device’s name. Under “Connectivity Tools”
choose “launch Web browser for OEM-Cfg1.” This will
open the device’s browser-based management window.
Login to web interface:
Username “dpac”
Password: “dpac”
Continue configuration via the Web interface. Start with
the Configuration -> Express Setup page.
(Continued)
Configure Your Device
6
Note: Use the Help features of the interface to help you
configure the device. When you are done configuring the
device, press ‘Commit’ to save the changes, then ‘Restart’ to
restart the device. You can optionally press ‘Reload’ if you have
further configuration changes to make.
