1-888-948-2248 |
Europe:
+353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: [email protected]
Fast and easy on the web:
www.advantech-bb.com
QUICK START
GUIDE
Document Number: 710-11430-00_R0_ABDN-SE-IN54x0_0817qsg
Recommended Accessories
Model MDR-20-24
120VAC/5VDC Power Supply
or
Model PS-WDS
Power Supply with Appropriate
Cord (North America, EU, UK)
Serial Cables
Before you begin, be
sure you have the following:
ABDN-SE-IN5410 &
ABDN-SE-IN5420
Industrial Serial Device Server
+ Industrial Serial Device Server (included)
+ CD with Airborne Management Center
Software (included)
+ Antenna (included)
+ Power Supply (not included)
+ Ethernet Cable (not included)
If your device is connected and configured correctly, you
will see the following LED Status:
COMM: Green
(ON when port is open)
LINK:
Green
POST: Green
POWER:
Blue
LED
COLOR
AIRBORNE DEVICE STATE
POWER
Off
Adapter is not powered.
Blue
Adapter is powered.
POST
Off
Adapter is not powered.
Red
Adapter failed Power On Self Test (“POST”) and is not config
-
ured for wireless communication.
Amber
Adapter passed POST but is not configured for wireless network
communication.
Green
Adapter passed POST and is configured for wireless com
-
munication.
LINK
Off
Adapter is not powered.
Red / Off
(Periodic Blinking) Adapter is searching for a valid network
(Access Point) that matches device’s configuration.
Green
Adapter has successfully associated with an Access Point.
COMM
Off
If Power LED is also Off, then Adapter is not powered.
If Power LED is On then, No TCP session from WLAN or
Ethernet interface has been established.
Green
A TCP connection to the adapter has been established from the
Wireless or Ethernet interfaces but no traffic has been detected.
PIN
RS-232 (DTE)
Port 1 & 2
(Default)
RS-422/485
1
No Connect
No Connect
2
RxD
RxD +
3
TxD
TxD +
4
No Connect
No Connect
5
GND
GND
6
No Connect
RxD -
7
RTS
No Connect
8
CTS
No Connect
9
No Connect
TxD -
(Continued)
Check Your Setup
7
Connect the Antenna to the antenna connector located on
the side of the device.
Model C5UMB10FBG
Ethernet Cable
