Advantech AWS-825B Скачать руководство пользователя страница 5

Страница: 5 / 94

Safety Instructions

Read these safety instructions carefully.

Keep this user's manual for later reference.

Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or
spray detergents for cleaning. Use a damp cloth.

For pluggable equipment, the power outlet must be installed near the equipment and
must be easily accessible.

Keep this equipment away from humidity.

Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.

The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.

Position the power cord so that people cannot step on it. Do not place anything over
the power cord.

10.

All cautions and warnings on the equipment should be noted.

11.

If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.

12.

Never pour any liquid into an opening. This could cause fire or electrical shock.

13.

Never open the equipment. For safety reasons, the equipment should be opened only
by qualified service personnel.

14.

If any of the following situations arises, get the equipment checked by service
personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to the
user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

15.

DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20° C (-
4° F) OR ABOVE 60° C (140° F). IT MAY DAMAGE THE EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-1:1982 is equal to
or less than 70 dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

Содержание AWS-825B































































































Результаты поиска

Содержание AWS-825B

Отзывы:

Advantech AWS-825B, Руководство пользователя, Страница: 5 / 94

Результаты поиска

Содержание AWS-825B

Отзывы: