Advantech AWS-8124T, Руководство пользователя

Страница: 23 / 40

Chapter 2 System Setup 1 3
2.4 Removing the protective cover
To reach the disk drives, power supply and monitor you must slide
the main chassis out of its protective cover. First remove the top
cover and rear panel as described in section 2.2.
Remove the three screws on the side panel just above the card
brackets. Remove the two screws on the panel of the opposite
side, below the fan. Remove the one screw on the bottom panel.
Lastly, open the floppy disk door. Now you can slide out the main
chassis completely.
Note: Remember to open the floppy drive door before
you slide out the main chassis. The locking
mechanism of the door is of a push-open and
push-closed type.
Figure 2-3: Slide out the main chassis