Advantech ATM-4023, Руководство пользователя

Страница: 5 / 36

v
Packing List
Before setting up the system, check that the items listed below are
included and in good condition. If any item does not accord with the
table, please contact your dealer immediately.
1.
One ATM-4023 industrial workstation with 6.4” flat panel display
2. One accessory box, including:
- One HMI manual and drivers CD-ROM
- Cardboard Warranty
- Flat gray cable for 3.5. HDD and slim CD-ROM
- Two piece slim CD-ROM holders.
- HDD chassis bracket
- Rack Mounting Bracket (L, R)
- Four rubber clamp pads that are attached to hold-on clamp
- 4 x M3*5 screw (black)
- 2 x M3*5 screw
- 4 x M2*4 screw
- 4 x M6-32*6.2 screw
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User's Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning.
Use a damp cloth. Do not use liquid or spray detergents for clean-
ing.
4. For plug-in equipment, the power outlet socket must be located
near the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Drop-
ping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before con-
necting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.