4 ASMB-922I Startup Manual
1. Take off all the plastic caps behind the mounting holes
2. Insert the PME module into the PME slot of ASMB-922I
3. Take the plastic holder out from the bag.
Procedure for assembling the PME module to ASMB-922I motherboard
4. Find the two PME mounting holes.
5. Push the plastic holders down and make the latch pass
through and into those two holes.
6. Check and make sure that the plastic holder is firmly
connected to the two PCBs.
Notes
Hold ASMB-922I this way to prevent damage.
Do NOT hold ASMB-922I this way, it may cause chip dam-
age.
