Advantech ASMB-816 Series Скачать руководство пользователя страница 26

Страница: 26 / 110

ASMB-816 User Manual

2.9

Front Panel Connector (JFP1)

There are several external switches and LEDs to monitor and control the ASMB-816.

One front panel convert cable (P/N: 1700031926-11) for the onboard 2.0 to 2.54 mm

pitch header is provided in the accessory box.

2.9.1

Power LED (JFP1 Pins 14, 16)

JFP1 pin 14 and pin 16 are for the power LED. Refer to Appendix B for detailed infor

mation on the pin assignments. If an ATX power supply is used, the system’s power

LED status will be as follows.

2.9.2

Front Panel LAN Indicator (JFP1 Pins 5~8)

JFP1 pins 5, 6, 7, 8 connect to LAN indicator.

2.9.3

HDD LED Connector (JFP1 Pins 13, 15)

You can connect an LED to connector to indicate when the HDD is active.

Table 2.1: ATX Power Supply LED Status

ACPI Power Mode

LED (ATX power)

System On (S0)

System Hibernation (S4)

Slow flashes

System Off (S5)

Off

13 15

Содержание ASMB-816 Series















































































































Результаты поиска

Содержание ASMB-816 Series

Отзывы:

Advantech ASMB-816 Series, Руководство пользователя, Страница: 26 / 110

Результаты поиска

Содержание ASMB-816 Series

Отзывы: