background image

ASMB-584 User Manual

28

3.1

Introduction

AMIBIOS has been integrated into myriad motherboards for decades. In the past,

people often referred to the AMIBIOS setup menu as BIOS, BIOS setup or CMOS

setup.
With the AMIBIOS Setup program, you can modify BIOS settings and control the

special features of your computer. The Setup program uses a number of menus for

making changes and turning the special features on or off. This chapter describes the

basic navigation of the ASMB-584 setup screens.

Figure 3.1  Main setup screen

AMI’s BIOS ROM has a built-in Setup program that allows users to modify the basic

system configuration. This information is stored in NVRAM area so it retains the

Setup information when the power is turned off.

3.2

Entering BIOS Setup

Press <Del> or <Esc> at bootup to enter AMI BIOS Setup Utility, the Main Menu will

appear on the screen. Use arrow keys to select among the items and press <Enter>

to accept or enter the sub-menu.

When users first enter the BIOS Setup Utility, they enter the Main setup screen.

Users can always return to the Main setup screen by navigating to the Main tab.

There are two Main Setup options. They are described in this section. The Main

BIOS Setup screen is shown below.

Содержание ASMB-584















































































































Отзывы: