AIMC-3422 Startup Manual 3
JOBS1+JWDT1: Hardware monitor alarm+watchdog
timer output selection
Function
Jumper Setting
2-3
Enable watchdog timer (Default)
4-5
Enable Hardware monitor alarm (Default)
JME1: Enable ME
Closed Pins
Result
1-2
Enable ME
(Default)
2-3
Disable ME
1
2
3
4 5
1
2
3
Jumpers and Connectors
(Cont.)
Declaration of Conformity
System I/O Interface
The drivers for the AIMC-3422 are located on the software
installation CD. Please click through to the desired folder
and follow the on screen instructions to install them.
Caution!
The computer is supplied with a battery-powered
realtime clock circuit. There is a danger of explo-
sion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended
by the manufacturer. Discard used batteries ac-
cording to manufacturer’s instructions.
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditons:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired opera-
tion.
Software Installation
