Advantech AIMB-766 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 118

background image

AIMB-766 User Manual

66

4.1

Before you begin

To facilitate the installation of the enhanced display drivers and utility software, read
the instructions in this chapter carefully. The drivers for the AIMB-766 are located on
the software installation CD.

Before you begin, it is important to note that most display drivers need to have the
relevant software application already installed in the system prior to installing the
enhanced display drivers. In addition, many of the installation procedures assume
that you are familiar with both the relevant software applications and operating sys-
tem commands. Review the relevant operating system commands and the pertinent
sections of your application software’s user manual before performing the installa-
tion.

4.2

Introduction

The Intel Chipset Software Installation (CSI) utility installs the Windows INF files that
outline to the operating system how the chipset components will be configured. This
is needed for the proper functioning of the following features:

!

Core PCI PnP services

!

IDE Ultra ATA 100/66/33 and Serial ATA interface support

!

USB 1.1/2.0 support (USB 2.0 driver needs to be installed separately for Win-
dows 98)

!

Identification of Intel chipset components in the Device Manager

Note!

Fiel are compressed. Do not attempt to install the drivers by copying the
files manually. You must use the supplied SETUP program to install the
drivers.

Note!

This utility is used for the following versions of Windows, and it has to be
installed before installing all the other drivers:

!

Windows 2000

!

Windows XP

!

Windows Vista

«
...
76
77
78
79
80
...
»

Содержание AIMB-766























































































































Отзывы:

Нет отзывов

Похожие инструкции для AIMB-766

IP-M945A SERIES

Бренд: WEALTHTEC Страницы: 72

Бренд: IEI Technology Страницы: 140

Бренд: ECS Страницы: 93

Бренд: Texas Instruments Страницы: 13

Бренд: Yamaha Страницы: 223

Бренд: Nuvoton Страницы: 14

Бренд: ON Semiconductor Страницы: 19

IONITX-N series

Бренд: Zotac Страницы: 50

Бренд: Gigabyte Страницы: 40

Бренд: XFX Страницы: 120

Бренд: Gigabyte Страницы: 96

Бренд: JETWAY Страницы: 46

Бренд: TESSERA Страницы: 31

SBC86620 Series

Бренд: AXIOMTEK Страницы: 90

Бренд: unicore Страницы: 29

Бренд: unicore Страницы: 28

Бренд: Yamaha Страницы: 118

Бренд: Yamaha Страницы: 129

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды