Advantech AIMB-740-B Скачать руководство пользователя страница 16

Страница: 16 / 130

AIMB-740-B/741-B

User’s Manual

•

EIDE hard disk drive interface:

Supports up to four IDE hard disk

drives other enhanced IDE devices. Supports PIO mode 4 (16.67 MB/s
data transfer rate) and Ultra ATA 100/66/33 (100/66/33 MB/s data
transfer rate).

•

Floppy disk drive interface:

Supports up to two floppy disk drives,

5¼" (360 KB and 1.2 MB) and/or 3½" (720 KB, 1.44 MB). BIOS
enabled/disabled

1.3.2 Memory

•

RAM:

Up to 2GB in two 184-pin DIMM sockets. Supports DDR200/

266 SDRAM (AIMB-740-B supports DDR333).

•

ECC:

AIMB-740-B: not supported, AIMB-741-B: supported

1.3.3 Input/Output

•

PCI Bus:

5 PCI slots, 32-bit, 33MHz. PCI 2.2 compliant

•

EISA Bus:

2 slots with PCI-to-ISA controller IT8888

•

Enhanced parallel port:

Configurable to LPT1, LPT2, LPT3, or dis-

abled. Standard DB-25 female connector provided. Supports EPP/SPP/
ECP

•

Serial ports:

Two RS-232 ports with 16C550 UARTs (or compatible)

with 16-byte FIFO buffer. Supports speeds up to 115.2 Kbps. Ports can
be individually configured to COM1, COM2 or disabled

•

Keyboard and PS/2 mouse connector:

Two 6-pin mini-DIN connec-

tor are located on the mounting bracket for easy connection to a key-
board and PS/2 mouse.

•

USB port:

Supports up to six USB 2.0 and transmission rate up to

480Mbps. (Six USB ports are available in AIMB-740-B/741-B)

1.3.4 VGA interface

• Interface:

•

AIMB-740-B:

Chipset integrated VGA controller, shared system mem-

ory 8 to 64 MB; AIMB-740-B do not support AGP

•

AIMB-741-B:

AGP 4X slot, 1.5V only

1.3.5 Ethernet LAN

• Supports single/dual 10/100Base-T networking (or optional single/

dual10/100/1000Base-T Ethernet networking)

•

Chipset:

Intel® 82562 and 82551 chipset for 10/100Base-T LAN or

single/dual Intel 82541 chipset for GbE LAN

Содержание AIMB-740-B



































































































































Результаты поиска

Содержание AIMB-740-B

Отзывы:

Похожие инструкции для AIMB-740-B

Бренды по названию

Популярные бренды

Advantech AIMB-740-B, Руководство пользователя

Результаты поиска

Содержание AIMB-740-B

Отзывы:

Похожие инструкции для AIMB-740-B

Бренды по названию

Популярные бренды