RS232
RS422
RS485
1
2
3
1
2
3
1
2
3
1
2
3
AIMB-701 Startup Manual 3
The CD disc contains a driver installer program that will
lead you through the installation of various device drivers
needed to take full advantage of your motherboard.
Caution!
The computer is supplied with a battery-pow-
ered realtime clock circuit. There is a danger
of explosion if battery is incorrectly replaced.
Replace only with same or equivalent type
recommended by the manufacturer. Discard
used batteries according to manufacturer’s
instructions.
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Jumpers and Connectors
Software Installation
JSETCOM3: COM3 RS-232/422/485 Mode Selector
Users can use JSETCOM3 to select RS-232, RS-422 or
RS-485 mode for COM3. The default setting is RS-232.
JWDT1: Watchdog timer output option
Closed Pins
Result
1-2
NC
2-3
System reset*
* Default
PSON1: ATX, AT mode selector
Closed Pins
Result
1-2
AT Mode
2-3
ATX Mode*
* Default
Declaration of Conformity
NC 1-2 Closed *System Reset 2-3 Closed
AT Mode 1-2 closed *ATX Mode 2-3 closed
