Advantech AIMB-341, Руководство пользователя, Страница: 25 / 84

15 Chapter 2
3. Slip the DIMM module perpendicular into the socket, apply more pres-
sure until the clips fix the DIMM and socket securely.
4. Check to ensure that the DIMM is correctly seated and all con-
nector contacts touch. The DIMM should not move around in its
socket.
2.10 ATX power control connector (ATX1, ATX2)
The AIMB-341 supports ATX power. ATX2 supplies main power (+5V,
+12V, 5VSB), and it is a 20-Pin power connector, with Fixed Lock.
ATX1 supplies 12V Power, and it is a 4-Pin power connector, with Fixed
Lock
2.11 Printer port connector (CN5)
Normally, the parallel port is used to connect the card to a printer. The
AIMB-341 includes a multi-mode (ECP/EPP/SPP) parallel port accessed
via CN5 and a D-SUB 25-pin connector.
The parallel port interrupt channel is designated to be IRQ7.
You can select ECP/EPP DMA channel via BIOS setup.
2.12 CompactFlash Card Socket
The AIMB-341 provides a 50-pin socket for CompactFlash card type I/II.
2.12.1 CompactFlash(CN35)
The CompactFlash card occupies a secondary IDE channel which can be
enabled/disabled via the BIOS settings.
Important Make sure that the ATX power supply can take
at least a 10 mA load on the 5 V standby lead
(5VSB). If not, you may have difficulty power-
ing on your system.