Advantech AIMB-277, Руководство пользователя

Страница: 20 / 112

AIMB-277 User Manual 10
1.9 System Memory
AIMB-277 has two sockets for a 260-pin DDR4 SO-DIMM. These sockets use a 1.2 V
unbuffered double data rate synchronous DRAM (DDR SDRAM). DRAM is available
in capacities of 4GB, 8GB, 16GB and 32GB. The sockets can take any combination
with SODIMMs of any size, giving a total memory size between 4GB, 8GB, 16GB,
and up to max 64GB. AIMB-277 does NOT support error checking and correction
(ECC).
1.10 Memory Installation Procedures
To install SODIMMs, first make sure the two handles of the SODIMM socket are in
the “open” position, i.e., the handles lean outward. Slowly slide the SODIMM module
along the plastic guides on both ends of the socket. Then firmly but gently (avoid
pushing down too hard) press the SODIMM module well down into the socket, until
you hear a click when the two handles have automatically locked the memory module
into the correct position of the SODIMM socket. To remove the memory module, just
push both handles outward, and the memory module will be ejected by the mecha -
nism.
1.11 Cache Memory
The AIMB-277 supports a CPU with one of the following built-in full speed last level
caches:
20MB for Inter Core i9-10900E/i9-10900TE
16MB for Inter Core i7-10700E/i7-10700TE
12MB for Inter Core i5-10500E/i7-10500TE
6MB for Inter Core i3-10100E/i7-10100TE
6MB for Inter Core i3-10100E/i7-10100TE
4MB Pentium G6400E/G6400TE
2MB Celeron G5900E/G5900TE
The built-in second-level cache in the processor yields much higher performance
than conventional external cache memories.
1.12 Processor Installation
The AIMB-277 is designed to supported Intel 10th Gen LGA1200, Core i9/Core i7/
Core i5/Core i3, Pentium, Celeron processor.