Advantech AIMB-215 B1, Руководство пользователя

Страница: 33 / 134

21 AIMB-215 B1 User Manual
Chapter 2
C
onnecting
Peripherals
2.8.1 ATX Soft Power Switch (JFP1 + JFP2/PWR_SW)
For computer cases equipped with ATX power supply, users should connect the
Power On/Off button on the computer case to (JFP1 + JFP2/PWR_SW)
for conve-
nient Power On/Off functionality.
2.8.2 Reset (JFP1 + JFP2/RESET)
Many computer cases offer the convenience of a specific reset button. Connect the
wire for the reset button.
2.8.3 HDD LED (JFP1 + JFP2/HDDLED)
An LED can be linked to the connector (JFP2/HDDLED) to indicate when the HDD is
active.
2.8.4 External Speaker (JFP1 + JFP2/SPEAKER)
(JFP1 + JFP2/SPEAKER) is a four-pin connector for an external speaker. If no exter-
nal speaker is available, the AIMB-215 B1 provides an onboard buzzer as an alterna-
tive. To enable the buzzer, set Pins 7-10 as closed.
2.8.5 Power LED and Keyboard Lock Connector (JFP3/PWR_LED
and KEY LOCK)
(JFP3/PWR_LED and KEY LOCK) is a five-pin connector for the Power-On LED and
Key Lock function. Refer to Appendix B for detailed information regarding the pin
assignments. The Power LED cable should be connected to Pins 1-3. The key lock
button cable should be connected to Pins 4 and 5.
Three power supply connection modes exist. The first is the ATX power mode, where
the system is powered on/off by momentarily pressing the power button. The second
is the AT power mode, where the system is powered on/off using the power supply
switch. The third is another AT power mode that involves the front panel power
switch. The status differences indicated by the power LED are listed in the following
table:
Table 2.2: ATX Power Supply LED Status (AT power not supported)
Power mode
LED
(ATX power mode)
(On/off by
momentarily
pressing the power
button)
LED
(AT power mode)
(Powered on/off using
the power supply
switch) LED
(AT power mode)
(Powered on/off
using the front panel
switch)
PSON1
(on the back plane)
jumper setting
Pins 2-3 closed Pins 1-2 closed
Connect Pins 1 and 2
to the panel switch
using a cable
System On On On On
System Suspend Fast flashing Fast flashing Fast flashing
System Off Slow flashing Off Off