manualshive.com logo in svg

Advantech AIMB-214, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-214 Скачать руководство пользователя страница 72

AIMB-214 User Manual

60

7.1

Introduction

The AIMB-214 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes
(Intel 82583V(LAN1)) and 82574L (LAN2)) that offer bandwidth of up to 500 MB/sec,
eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at
1000 Mbps.

7.2

Features

Integrated 10/100/1000 Mbps transceiver

10/100/1000 Mbps triple-speed MAC

High-speed RISC core with 24-KB cache

On-chip voltage regulation

Wake-on-LAN (WOL) support

PCI Express X1 host interface

7.3

Installation

The AIMB-214's Intel 82583V(LAN1) and 82574L (LAN2) Gigabit integrated control-
lers support all major network operating systems. However, the installation procedure
varies from system to system. Please find and use the section that provides the
driver setup procedure for the operating system you are using.

7.4

Windows 7 Driver Setup (Intel 82574L/82583v)

Insert the driver CD into your system's CD-ROM drive. Select the LAN folder then
navigate to the directory for your OS.

Note!

Before installing the LAN drivers, make sure the CSI utility has been 
installed on your system. See Chapter 5 for information on installing the 
CSI utility.

Содержание AIMB-214





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды