5
NCC Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the
characteristics and functions of the original design of the certified lower power frequency electric machinery.
Article 14
The application of low power frequency electric machineries shall not affect the navigation safety nor interfere
a legal communication, if an interference is found, the service will be suspended until improvement is made
and the interference no longer exists.
Safety Instructions
1.
Read these safety instructions carefully.
2.
Keep this user manual for later reference.
3.
Disconnect this equipment from AC outlet before cleaning. Do not use liquid or spray detergents
for cleaning.
4.
Keep this equipment away from hazard locations.
5.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
could cause damage.
6.
Do not leave this equipment in an environment unconditioned where the storage
temperature under -10
C or above 60
C, it may damage the equipment.
7.
Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
8.
Place the AC power adapter such a way that people cannot step on it. Do not place anything
over the power adapter.
9.
All cautions and warnings on the equipment should be noted.
10.
If the equipment is not used for long time, disconnect it from the power source to avoid
being damaged by transient over-voltage.
11.
Never pour any liquid into MSR/IC Card reader slots of the
AIM-37AC-MXXXXXXXXXXXXXX Series. This could cause fire or electrical shock.
12.
Never open or disassemble the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
13.
If any of the following situations arises, get the equipment checked by service personnel:
a.
The power adapter plug is damaged.
b.
Liquid has penetrated into the equipment.
