Advantech AIIS-5410P, Руководство пользователя

Страница: 21 / 89

9 AIIS-5410P User Manual
Chapter 2
H
/W Installation
2.2.2 Jumper list
2.2.2.1 Clear CMOS
AIIS-5410P single board computer contains a jumper that can erase CMOS data and
reset the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
2.2.2.2 System AT/ATX mode function option
AIIS-5410P support AT or ATX mode and Default is ATX module. if you want to
change to AT mode that you can find AT/ATX mode jumper in motherboard.
2.2.2.3 System ME mode function option
AIIS-5410P supports ME Enable & Disable and Default is "Disabled". If you want to
change the ME mode that you can set ME mode jumper in Mother-board.
2.2.2.4 System WatchDog mode function option
AIIS-5410P single board computer contains a jumper that can set Watch-Dog mode.
Table 2.1: Jumper List
Label Function
JCMOS1 Clear CMOS
PSON1 System AT/ATX mode option
JME1 ME jumper mode option
JWDT1_JOBS1 Watch-Dog mode option
CMOS1 Clear CMOS
Footprint 3x1 Pin
Setting Function
(1-2) Normal (default)
(2-3) Clear CMOS
PSON1 System AT/ATX mode option
FootPrint 3x1 Pin
Setting Function
(1-2) AT module
(2-3) ATX module
JME1 System ME mode option
FootPrint 3x1 Pin
Setting Function
(1-2) ME Enable (Default)
(2-3) ME Disable
JWDT1_JOBS1 Watch-Dog mode function option
FootPrint 5x1 pin
Setting Function
(2-3) Watch Dog
(4-5) ERR_BEEP