manualshive.com logo in svg

Advantech A120-X5X, Руководство пользователя

Поделиться
Скачать
Advantech A120-X5X Скачать руководство пользователя страница 118

104

PPC-A84/A120 User's Manual

8.1 Award BIOS Setup

The PPC-A84/A120 comes with an Award BIOS chip that contains the
ROM setup for your system. This chip serves as an interface between
the processor and the rest of the mainboard's components. This
chapter explains the information contained in the setup program and
tells you how to modify the settings according to your system configu-
ration. Some setup items will not be explained, because it is recom-
mended that users do not change such items.

Note:

Values for the various setup items that appear on

your own screen (including default values) may not
be the same as the values shown on the screen
figures in this chapter. This is because the BIOS is
revised and updated from time to time. If in doubt,
check Advantech's web site for the latest BIOS
versions and related information.

8.2 CMOS Setup Utility

Figure 8-1: Setup program initial screen

Содержание A120-X5X

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды