Advantech-DLoG DLT-V83 Series Скачать руководство пользователя страница 11

Страница: 11 / 157

Unpacking, transporting, storing DLT-V83

DLT-V83 Operating Instructions V2.00

11 / 157

4.3.

Storage

WARNING

Personal injury from battery packs: Short-circuit, fire, chemical burns, toxic substances.

Devices with integrated UPS/battery packs can ignite if stored improperly (risk of fire), cause

chemical burns or release toxic substances.



Store the cable cover with battery packs separately from the DLT-V83 device.



Handle the cable cover with battery packs carefully; do not damage; do not drill through

and do not crush or drop.



Store segregated, separate from acids and other materials.



Store in a cool, dry place.



Comply with the specified environmental conditions for storage.



Provide for sufficient ventilation of the storage location.



Do not allow water or other liquids to come into contact with the device (exercise particular

caution with corrosive liquids).



Do not store the device near sources of heat or fire, open flames or heaters.



Do not allow it to come into contact with fire.



Have suitable fire extinguishers ready (foam or powder) in accordance with safety

regulations.

Prevent Property damage due to deep discharge

Storing the battery packs incorrectly will cause them to discharge completely (deep discharge) and thus

damage them irreparably.



Place the DLT-V83 into operation within 3 (three) months after receiving it.



Charge the integrated battery packs by connecting the DLT-V83 to the power supply.



If you are not placing the DLT-V83 into operation within 6 (six) months, make sure you charge it

intermediately.

Protecting touchscreens from damage



Protect touchscreens from sharp edges, impacts, and heavy objects.



If stacking, do not stack higher than four devices.



Place devices front-to-front in this case. The VESA mounting point on the rear side of the device

can damage the touchscreen of another device.



Use protective material (non-flammable!) between the devices as a precaution.

Содержание DLT-V83 Series






























































































































































Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды

Advantech-DLoG DLT-V83 Series, Руководство по эксплуатации

Результаты поиска

Содержание DLT-V83 Series

Отзывы:

Похожие инструкции для DLT-V83 Series

Бренды по названию

Популярные бренды