Advantech-DLoG
DLT-V6210 Manual V1.00
Page 23 / 56
6.3.2.
Securing the ground using ring tongue to the ground bolt
Fig. 6.3: Ring tongue secured to the ground bolt
Secure the ring tongue of the power supply cable to the ground bolt.
ATTENTION
To make sure the device is grounding correctly, it
is important to follow the correct order to put the
components on the ground bolt as below (from
inside to outside):
1.
Place
“toothed washer“
first(internal).
2.
Then put the “
Ring Tongue of the power
supply cable
” (flat side faces DLT-V6210
connector panel).
3.
Tightening the nut hand-tight.
1
2
3
