S1 DISC PLAYER
_____________________________________________________________________
____
___________________________________________________________________
_____
Page 3
Unpacking
When you have received your S-1, you should make
sure that the shipping box is in its original state. If
however that should not be the case, please
contact your dealer. Please unpack your unit
carefully; there are several parts that can be
damaged. We suggest that you to keep your box
and shock absorbers. Save your plastic bag, inserts,
and carton. You may need these later for
transporting the S-1 or for shipment in the event it
ever requires factory service. Record the serial
number (on rear panel) here for future reference:
____________________
Please make sure that your shipping box contains
the
following:
1 pc ADVANTAGE S-1
1 pc Remote control
1 pc Power cord
2 pcs Batteries LR03 (AAA)
Cleaning
To clean the unit, use only a soft tissue (Kleenex
type). Never apply abrasive cleaners to the outer
surfaces of the unit.
Note!
At no time should liquid cleaners be applied directly
to the S-1, as direct application of liquids may result
in damage to electronic components within the unit.
Installation
Install the Compact Disc player on a level, vibration-
free surface. Severe vibration, or operation in a tilted
position, may cause the player to mis-track. The
player may be stacked with other stereo
components, as long as there is adequate
ventilation around it.
If the player is placed in close proximity to a radio
tuner (AM or FM), a VCR, or a television set, the
operation of its digital circuits may produce
interference that would affect reception of weak
broadcast signals. If this occurs, move the CD
player away from other devices or switch it off when
viewing or listening to broadcasts.
