ADVANTAGE AIR MyPlace, Руководство пользователя

Страница: 7 / 19

User Manual V3.3
7
4 - MYZONE (OPTIONAL)
The MyZone feature makes that particular zone the “information centre” for the
air conditioning unit. That means the set-point for that zone becomes the set-
point the air conditioning unit will work toward. The actual measured temperature
of that zone is the temperature sent to the unit for it to make its decisions about
whether to start/stop or speed up/down to effectively achieve the set-point while
maintaining constant airflow in the MyZone.
The MyZone can be any temperature controlled zone that is currently turned ON,
to change the MyZone to another zone press the thermometer symbol next to the
zone you want to be the new MyZone.
This feature can be particularly important when you have an unusually high
requirement for air conditioning in a particular area. For example, a group of
people watching a movie in Theatre room with all the electronic A/V equipment
turned on will have a larger requirement for air conditioning than in other rooms
in the house. Setting the Theatre as MyZone will ensure that the system continues
running until the temperature set-point for that room is achieved.
Only one temperature controlled zone can be the MyZone at any one time, if you
are using multiple zones it is recommended that you make the largest zone the
MyZone and then move the MyZone around as you move around the home.
MyZone is an optional feature available on systems where MyZone has been
enabled; your dealer may enable this feature depending on the way you use your
system and the layout of the installation.
NOTE : MyZone is not available for systems with no temperature sensors
installed.
20°
24°
Lounge
80%
Kitchen
21°
23°
Theatre
OFF
Master Bed
21°
24°
Bed 1
100%
Bed 2
65%
Bed 3
Mode Zones Plan Setup
Help
Active MyZone
Press to set this
zone as Myzone