www.advancedco.com
12
Note: Any Switch LED Module can be allocated to peripheral bus addresses of 26 to 41 (DIP switch
addressing 0 thru 15). However, only sixteen (16) Switch LED Module’s (of any type) can be added to a
single Axis
AX
AX-CTL base card P-BUS (RS485 serial communications).
To program the specific peripheral bus Switch LED Module, click on the peripheral bus module and then click on the
(magnifying glass) button. This will bring you to the specific module programming area (see figure 13, 14,
15).
Figure 5
Figure 12 – Switch LED Module Peripheral Bus Programming
