2
I
ndustrial Radio
Standard Charger
1. Insert the radio and battery or
battery alone into the charging cup.
Charging begins and the red LED
will light continuously. When the
charging cycle is complete, the red
LED will change to green. Charging
time is less than 2.5 hours.
2. After the battery is fully
charged, the charger will shut off
automatically.
3. A flashing red LED indicates a defective battery. This can be
caused by an old battery or a battery defect. Contact your dealer
for instructions.
Notes:
*
Batteries should be charged in a dry environment at room
temperature.
*
If the battery cannot reach normal capacity after charging,
you will need replace the battery.
*
Do not short out the battery terminals or dispose of the
battery by fire.
Battery Charging Information
Содержание awr2108
Страница 1: ......
