2
Back Panel
Programmable Key Functions
There are four programmable soft keys, P1, P2, P3, and Call. The following table
shows the programmable functions available. Each key can be programmed for a
short and long press function as noted in the programming software.
Key Parameter Function
Application
Power Switch
Allows toggling of the RF output power be-
tween high (H) and Low (L) settings
Monitor (Analog)
Opens squelch w/ signaling
Monitor Momentary (Analog)
Opens squelch w/ signaling for duration of
key press
Squelch Off (Analog)
Squelch off
Squelch Off Momentary (Analog)
Squelch off for duration of key press
Zone Up
Selects next logical zone up from current
Zone Down
Selects next logical zone down from current
Scan
Radio steps between channels, stopping on
channel with matched signaling
Talk Around
Direct communications on repeater output
One Touch Access (1-4)
Short-cut operation for selected features,
press one-touch key to start pre-programmed
function by PTT
Local ID Report
Announces programmed DMR Unit ID
CH ID Announce
Announces currently selected Channel
Power Announce
Announces selected output power
CH Type Announce
Announces whether channel is digital or
analog
