manualshive.com logo in svg

Advanced Telemetry Systems R4500S, Руководство пользователя

Поделиться
Скачать
Advanced Telemetry Systems R4500S Скачать руководство пользователя страница 59

 

Advanced Telemetry Systems, Inc.          R4500S Reference User Manual          R05-11-A 

59

The screens will be the same for viewing or editing the default configuration.  In the 

View Default Configuration

 

mode, no parameters can be modified. 
 
Only the selections in blue and the numeric entries in green can be modified.  No information will be saved, unless 
the green or blue buttons are selected; 

Save to File,

 

Send to Receiver 

or

 Set Receiver Clock to PC Clock

.  See 

section 

2.3 Defaults

 for information on each configuration parameter. 

 
All default configurations can be retrieved from the receiver or from a file, and sent to the receiver or saved to a file. 
 
If no configuration was sent to the receiver or saved to a file, selecting 

Close

 will not save any changed values. 

 
When selecting the 

Set Receiver Clock to PC Clock

 button, the PC time is sent to the R4500S and is converted 

to: Year, Julian Day, and 24 hour time format. 

 

12.3.3 View / Edit Frequency Tables  
 

 

 

 
 
The screens will be the same for viewing a frequency table or editing a frequency table.  In the 

View Frequency 

Tables 

mode, no parameters can be modified. 

Содержание R4500S










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды