4- & 8-Channel Digital Video Recorder
71
Highlight the box beside
To
and press the
button to toggle between On and Off. When set to
Off, you can enter a specific Date and Time. When set to On, the search will be from the last
recorded image.
Highlight the box beside
Type
and press the button. You can select between
Motion Search
and
Museum Search
.
Motion Search
G
detects motion in the defined area.
Museum Search
detects if a defined object has moved.
Highlight the box beside
Zone
and press the button. An image from the video appears with
a grid overlaid. You can turn sensor blocks On and Off to define the area of the picture in which
you want to search for motion.
NOTE: Defining the area of the image in which you want to search for motion is nearly
identical to setting up the DVR for Motion Detection. Please refer to
Motion Detection s
creen
in
Chapter 3 — Configuration
for more detailed instructions on setting up the detection
blocks.
NOTE: When setting the Museum Search Zone, the zone should be placed inside of the
border line of the target object. If the selected block is placed on the border line, the
sensitivity of the Museum Search may decrease.
The zone should be placed or focused on the centre or, at least, within the outline of targeted object.
Highlight the box beside
Sensitivity
and press the button. You will be able to select from
1
(low sensitivity) to
5
(high sensitivity).
Highlight the box beside
Min. Blocks
and press the button. You will be able to set the number
of sensor blocks that must be activated. Setting the Min Blocks will only be available if Motion
Search is selected.
Once you set your desired search conditions, highlight
Search
and press the button to display
the search results in the
Motion
Search
screen. Selecting
Cancel
exits the screen without saving
the changes.
When you search for motion events of another camera, you will be asked whether or not you want
to delete the previous search results from the list.
You can search video from the first to last recorded
images, or you can set the start and stop times and dates.
Highlight the box beside
From
and press the button
to toggle between On and Off. When set to Off, you
can enter a specific Date and Time. When set to On,
the search will be from the first recorded image.