manualshive.com logo in svg

Advanced Technology Video ED2808, Руководство пользователя, Страница: 66 / 95

Поделиться
Скачать
Advanced Technology Video ED2808 Скачать руководство пользователя страница 66

User’s Manual 

 

58 

 
 

Live Monitoring Menu 

 

Login/Logout 

 

Selecting   (Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User 
and enter the password to log into the system.  Selecting   (Logout) in the Live Monitoring menu displays the Logout 
screen asking you to confirm whether or not you want to log out the current user

. 

 

Display 

 

 

Full Screen:

  Selecting 

 

(Display) 

→

 

 (Full Screen) and choosing the camera number button displays the 

selected camera full screen.  It is the same as pressing the individual camera buttons on the front panel or clicking 
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7 or 3x3).  Clicking 
the left mouse button on the screen again returns to the previous display mode. 

 

PIP, 2x2, 1+5, 1+7, 3x3:

  Selecting 

 

(Display) 

→

 

,  , 

, 

 or   (PIP, 2x2, 1+5, 1+7 or 3x3) displays

 

the cameras in the selected multiview screen mode (PIP, 2x2, 1+5, 1+7 or 3x3).  Selecting each display mode is the 
same as pressing the 

LAYOUT

 button on the remote control or scrolling the mouse wheel up and down when in one 

of the multiview formats (i.e., 2x2, 1+5, 1+7 or 3x3). 

 

NOTE:  In the 1+5 or 1+7 display mode, the main channel indicates the channel displayed on the large screen 

which is displayed in the top-left.  You can select the camera you want to display on the main channel 
screen.  Select a channel on the screen and click the right mouse button to display the Camera Menu.  
Selecting 

Go To Main

 swaps the selected channel with the main channel.  This function is supported only in 

the 1+5 and 1+7 display modes and can be activated from any of channel screens except the main channel 
screen.

 

 

 

Camera OSD, Status OSD:

  Selecting 

 

(Display) 

→

 Camera OSD

 or 

Status OSD

 toggles Camera OSD 

or Status OSD On and Off. 

 

Previous Group, Next Group 

 
Selecting 

 or 

 (Previous Group or Next Group) in the Live Monitoring menu moves to the previous or next page. 

 

Freeze 

 

Selecting   (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select   again.  
It is the same as pressing the   (Play/Pause) button.  Pressing any button except for the 

MENU

 and 

PANIC

 buttons 

while in the Freeze mode can also exit the Freeze mode.  While in the Freeze mode, the icon   displays in bottom-left 
corner if 

Freeze

 is selected in the Display setup screen (OSD tab).

 

 

Alarm 

 

Selecting   (Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during an alarm.

 

 

Panic

 

 

Selecting   (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting   again stops 
panic recording.  It is the same as pressing the 

PANIC

 button.

 

 

Sequence 

 
Selecting   (Sequence) in the Live Monitoring menu causes the cameras to display sequentially.  It is the same as 
pressing and holding the 

MENU

 button for three seconds or longer.  When in one of the multi-view formats, selecting 

 will cause the DVR to go through predefined screen layouts (Full Sequence).  Or, the bottom, right screen will display 

live cameras sequentially (Cameo Sequence).  For example, if you select   in the 2x2 format, the 8-channel DVR 
changes pages as follows: 

 

Содержание ED2808
































































































Отзывы:

Нет отзывов