Advanced PureAir Newport ULTRA, Инструкция по эксплуатации, Страница: 11 / 18

CLEANING AND MAINTENANCE
9
Disassembling the Air Purifier
2
Remove the dust collector cell
Remove the Pre-filter
Remove the Front Cover
1
B
When assembling
1. Insert into position B
2. Firmly reconnect the dust collector cell back to its
original position
1. Push the dust collector cell towards the bottom
of the device
2. Hold the two tabs and pull forward the dust
collector cell
2
Press the front cover by thumbs and gently
pull forward the front cover.
When assembling
1. Insert into Position A
2. Firmly reconnect the front cover back to its
original position
A
3
4
Remove the HEPA/Activated
carbon filter
Hold the Position C and lift up the pre-flter
When assembling
1. Attach the filter to the connecting locations
on the side
2. Fasten the filter on the front connecting locations.
2
C
5
Hold the strap to help
pulling out the filter.
When assembling
Install the filter with exact
front-and-back direction
as indicated on the sides
of the filter. Do not reverse
the front and back of the
filter.
Remove the Formaldehyde/ TiO
2
Filter
Hold the strap to help
pulling out the filter
When assembling
Install the filter with exact
front-and-back direction as
indicated on the sides of
the filter.
1
After unplugging, disassemble the unit in sequence of 1 to 5 as shown below. (Put the unit back together in
the reverse 5 to 1 sequence.)
Cleaning the unit while it is plugged in may rusult in electric shock, electric spark and serious
injury.Unplug the unit before cleaning or maintenance.