IPSWS
Installation Instructions
Version 1.4
For additional support, visit
www.anetdsupport.com
Device Operation
1.
Connect the other end of the network cable to a PoE (Power over Ethernet) network switch, or a
PoE injector, on a network with a DHCP server. Some equipment options are listed on the
support site:
www.anetdsupport.com/peripherals
.
2.
If properly installed, the unit should boot within 30 seconds. An audible beep should be heard at
this time indicating the device is fully operational.
3.
Consult the
Clockwise User manual
(see
www.anetdsupport.com/documents
) or 3
rd
party
software guide for further instructions on sending audio to the device.
