Spatial FOG Reference Manual
Page 82 of 144
Version 2.3
03/05/2018
11.9.3
Log Converter
This tool allows the user to convert Spatial FOG log files into various standard formats
that are readable by many programs. The position ofset values can used to project
the exported position to a point other than the centre of the Spatial FOG unit. For most
users these values should be left at zero.
11.9.4
NTRIP Client
The NTRIP client can be used to connect to a network DGPS or RTK service to stream
correction data to Spatial FOG for DGPS or RTK. The NTRIP client requires an internet
connection to function. Please contact
for
guidance on getting set up with network DGPS or RTK.
11.9.5
Network Connect
The network connect dialogue allows Spatial FOG Manager to make a connection to
Spatial FOG over a TCP/IP network rather than the default serial port connection. This
allows Spatial FOG to be used with ethernet to serial converters. Advanced Navigation
recommends Lantronix ethernet to serial converters.
Illustration 62: Screenshot of Spatial FOG Manager
log converter dialogue
Illustration 63: Screenshot of Spatial FOG Manager NTRIP
client dialogue
Содержание Spatial FOG Dual
Страница 1: ...Spatial FOG Reference Manual ...