Spatial Reference Manual
Page 90 of 158
Version 4.4
04/06/2019
11.9.5
NTRIP Client
The NTRIP client can be used to connect to a network DGPS or RTK service to stream
correction data to Spatial for DGPS or RTK. The NTRIP client requires an internet
connection to function. Please contact
for
guidance on getting set up with network DGPS or RTK.
11.9.6
Network Connect
The network connect dialogue allows Spatial Manager to make a connection to Spatial
over a TCP/IP network rather than the default serial port connection. This allows
Spatial to be used with ethernet to serial converters. Advanced Navigation
recommends Lantronix ethernet to serial converters.
Illustration 56: Screenshot of Spatial Manager NTRIP client
dialogue
Illustration 57: Screenshot
of Spatial Manager network
connect dialogue