Advanced Native Technologies iROLLER 8, Руководство пользователя

Страница: 6 / 33

ENGLISH
iROLLER 8
| User manual
10 11 User manual |
iROLLER 8
5 | TROUBLESHOOTING
PROBLEM LEDS SOLUTION
No sound or
very low
sound level
Battery level leds off.
Make sure the device is
properly connected to the
power outlet and/or the
battery is not discharged.
Battery level leds on
but master lowered
Raise MASTER level.
Battery level leds lit, master
raised but low input channel level.
Check the connections
between the sources and the
mixer.
Raise inputs LEVEL.
Battery level leds on, master up
and media player in playback.
Check CH 3 selector.
Check MEDIA PLAYER source
(LINE/AUX, USB or bt).
Adjust VOL via .
Battery status red light on. Charge the battery.
No system
power up in
battery mode
Verify that the BATTERY
OPERATION selector is set
to ON
Distortion Peak led lit.
Lower level of CH1, 2, 3 inputs
and/or MASTER level.
Voice not clear Lower “REVERB” level
4.1 | BLUETOOTH
®
MENU
The following operations concern Bluetooth
®
mode menu. For USB stick operations, refer
to section 4.2. The MP3 player is equipped with Bluetooth
®
technology, which makes
it possible to play audio files from another external device (such as a Smartphone) on
your iROLLER 8 as long as the distance between the two devices is within 10 meters.
To synchronize and connect the MP3 player with a device equipped with Bluetooth
®
technology, use the following procedure:
1. Briefly press the MODE button until when the bt logo flashes.
2. Activate the Bluetooth
®
of your device to search for the receiver built into the
Media Player.
3. In devices list detected by your smartphone or tablet, select “iROLLER 8” to synchronize
your device with the Media Player.
4. After synchronization, the bt logo remains lit on the display and the unit emits an
acoustic signal of procedure completion. Once finished you can start playing the
songs.
WARNING : Syncronized Bluetooth
®
device music playback can be stopped and resumed
by pressing the PLAY/PAUSE button .
4.2 | USB MODE
USB stick has priority over the other inputs. By inserting the USB stick the Bluetooth
®
and LINE/AUX inputs are automatically disabled. The listening level can be adjusted
using the and buttons.