ENGLISH
iROLLER 10
| User manual
8
9
User manual
|
iROLLER 10
SAFETY PRECAUTIONS AND INSTRUCTIONS FOR CORRECT DISPOSAL OF VRLA
(LEAD-ACID VALVE REGULATED) BATTERIES
CAUTION:
Under normal conditions of use and operation of the device, there are no
hazards or risks for the lead-acid battery. However it is recommended to take note
of the following characteristics and adopt following safety precautions.
• VRLA batteries include an electrolyte containing diluted sulfuric acid.
Sulfuric acid has corrosive effect and can cause severe chemical burn.
• The lead compounds are classified as toxic (if ingested).
• In case of spillage use a binder, such as sand, to absorb spilled acid; use quicklime/
sodium carbonate to neutralize; dispose applying local regulations; do not allow entry
into sewers, ground or waterways.
• During the charge phase, or during operation, the lead-acid batteries may develop
hydrogen and oxygen gas, which in certain circumstances may form an explosive
mixture.
• The lead-acid may contain a considerable amount of energy, which can be a high
current source as well as a source of serious electrical shock in the event of a short
circuit.
• In case of fire don’t use water, but only fire extinguishing media like CO
2
or dry powder
extinguishing agent.
• To replace always refer to a qualified center.
• Keep indoors and away from heat - lead-acid batteries are not subject to freezing up
to a temperature of -50°C (-58°F).
• Whenever possible, charge the battery completely. Never store it completely empty or
half empty. If the device is inactive for a long period, disconnect the battery, covers the
terminals and store the battery in a dry place away from heat sources, and regularly
recharge the battery.
CAUTION:
This device contains a valve-regulated lead-acid VRLA battery,
used batteries are considered toxic waste and must be disposed in compliance
with local regulations.
3.3
|
MP3 SECTION
2
3
4
5
7
6
1
9
8
1 SD
Slot for SD card up to 32GB. Inserting the card, please check the right inserting
direction. The contact row of the SD memory card should be on the right.
To select SD as signal source for the MP3 player, use the MODE button.
2 MODE
Selectes MP3 player signal source (SD card/USB stick/Bluetooth
®
).
3 PLAY/PAUSE
Press this button to play or pause track reproduction.
4 STOP
Press this button to stop track reproduction.
5 REPEAT
REPEAT function allows track play in six different modes: Normal/Random/
Browse/All/Repeat One/Repeat Folder.
6 BACKWARD/FORWARD
Press briefly to select previous or next track. Press and hold these buttons
(> 1 sec.) to change MP3 player volume (
quieter,
louder).
7 USB IN
Slot for USB stick up to 32GB. To select USB as signal source for the MP3
player, use the MODE button.
8 IR
It allows to use the supplied remote control to manage MP3 player, directing
the remote control towards your device infrared interface. For a perfect
synchronization the visual line between devices must be free.
9 CONTROL DIGITAL DISPLAY
Backlit multi-function display.
