manualshive.com logo in svg

Advanced Instruments Anoxomat III, Руководство пользователя, Страница: 9 / 41

Поделиться
Скачать
Advanced Instruments Anoxomat III Скачать руководство пользователя страница 9

Chapter 1 

Installation and setup

9

Anoxomat® III User’s Guide

6. 

Hand-tighten the other end of the hose to the gas 
fitting on the back of the Anoxomat. Use an 11/16 in. 
wrench to tighten the hose.

7. 

Slowly open the gas cylinder valve and set the gas 
regulator to 1.75 bar ± .15 bar 25.5 ± 2 psi. 

8. 

Repeat for each gas connection.  

1.5 Install the recipe printer (optional)

1. 

Connect the printer cable to the RS232 socket on the 
rear panel of the Anoxomat.

2. 

Install the roll of printer paper.

3. 

Connect the printer's power cord to the Anoxomat's 
printer power connector.

See 

Activating the printer (optional) on page 12

.

The red protection label contains important 
information and setup codes for the Key Operator, and 
should be stored in a safe place. See 

Fig. 1.1

. 

1.6 Connect to a computer or network (optional)

If your Anoxomat includes a data interface to a computer 
or network:

• 

Use a “cross-link” Ethernet cable to connect  
the Anoxomat directly to the network card of  
the computer.

• 

Use a standard patch cable to connect to a network.

See instructions for 

Activating the data interface 

(optional) on page 13

.

1.7 Power up the instrument

1. 

Connect the power cord to the Anoxomat

 

and into a 

power outlet.

2. 

Remove and set aside the red protection label  

(

Fig. 1.1

)

 from the touchscreen. 

Keep the red label in a safe place as it contains 
configuration access codes.

Fig. 1.1: Red touchscreen protection label

3. 

Turn on the power switch and wait for the Main 
operation screen to display. 

4. 

The Anoxomat is equipped with a touchscreen that 
responds to the soft-touch pen supplied with the 
instrument or the tips of your fingers. The touchscreen 
may not respond well if you press with the flat of your 
finger. Never use sharp objects, pens, pencils, or 
anything that would leave a mark on the screen.

Содержание Anoxomat III










































Отзывы:

Нет отзывов