Operation
4-2
Right Front Control Panel
The right front control panel looks like the figure below.
Figure 1 Right Front Control
Panel
Top Roller:
The rocker switch will open and
close the main nip rollers. The
switch will illuminate when the rolls
are selected to close.
Speed Potentiometer:
The dial indicates the speed the
laminator will run.
Forward:
Press to put machine in
continuous run mode. Button will
illuminate when machine is in run
mode.
Stop:
Press to stop machine.
Reverse:
Press to jog the machine in
reverse. Drive will stop when
button is released.
Ready:
Indicator to show that top roll has
reached preset temperature.
Power:
Press and hold 15 seconds. to
reset machine. Button will
illuminate when machine has been
properly reset.
The cutout in the control panel is to hold your Microsoft Zune media player. The plug to connect your
media player to the speaker system in the Compadre is in the upper left of the cutout as shown above.
Make sure your Zune is not locked then align the headphone jack on the media player with the plug on
the Compadre. Carefully push the Zune to the left until the plug has fully inserted itself into the media
player. Allow Zune to rest in the opening. The holder may be rotated 90 degrees clockwise to allow the
media player to be viewed in portrait mode for mp3 playback. Rotate as shown above to view videos in
landscape mode. To remove the Zune, turn off media player then tilt the RH end of the media player up
and gently pull to the right until plug has been removed from your Zune. Please refer to the Zune
documentation for operating instructions on the media player.
