ADVANCED FLOORTECH AF-X1, Руководство по эксплуатации

Страница: 5 / 13

AF-X1
4
● Batteries of different specifications and brands have matching chargers. Using a
charger that does not match may damage the battery or even cause the battery to burst.
Be sure to pay great attention to it! The maintenance of the machine must be carried out
by professionals in the special maintenance department. If the machine is repaired and
disassembled without authorization, personal injury and damage to the machine may
occur. This machine has been systematically debugged before leaving the factory. After
maintenance and disassembly, make sure that all fasteners are not loose, and the
adjustment parts are adjusted and locked as required.
●The electrical components of the machine may be short-circuited when exposed to
water or in a humid environment. Make sure the electrical components are dry, wipe the
machine clean after use and park in a dry environment.
●The charging area should be ventilated. Please use the E-core power cord and power
supply with grounding wire for the charger. To prevent electric shock accidents to the
greatest extent, please install a leakage circuit breaker.
●It is strictly forbidden to place any objects on the battery.
●When cleaning the machine, please do not pour water into the air inlet of the suction
motor!
● Failure to pay attention to the label on the machine and the contents of the instruction
manual will result in injury. Be sure to read all labels on the machine before operating.
●The machine cannot be used on rough ground and slopes, and the operator cannot sit
on the machine to avoid contact with the rotating parts of the machine with hands, feet
and loose clothes.
●Be careful and slow when the machine is operating on the side, pay attention to the
space between the anti-collision wheel and the wall, and avoid the machine from moving
from small obstacles, such as ground power sockets, thresholds, ground line feet, etc.
●Using water or cleaning agent will wet the ground, and these places are easy for the
operator or others to slip, so please place a warning mark around it during operation.