background image

 

 

 

30 

3.11  Enabling 

On selection of the Enable Menu Option, the display shows the available Enable Functions.  

[Enable]                  User 1 Node  1 
 
   

ZONE/INPUTS

   OUTPUTS       GROUPS 

   REMOTE 

 

Press the 



 buttons to highlight the required menu option and then press the 

 button to select it. 

3.11.1 Enable - Zones and Inputs 

Selecting this option will show a list of zones containing disabled input devices. The complete zone, individual 
devices and other options within the zone can then be enabled (The display format is virtually identical to the 
equivalent Disable menu). 

3.11.2 Enable - Outputs 

When this option is selected, a pop-up menu appears asking if you want to enable ALL SOUNDERS, ALL 
BEACONS, FIRE ROUTING OUTPUTS, FIRE PROTECTION OUTPUTS, FAULT ROUTING OUTPUTS, ALL 
OTHER RELAY OUTPUTS, ONLY SELECTED OUTPUTS or the PAGER OUTPUT.  If ONLY SELECTED 
OUTPUTS is selected, the display will list only zones containing outputs that have been disabled. The individual 
outputs within the zone can then be enabled. 

(The display format is virtually identical to the equivalent Disable Menu).  

3.11.3 Enable - Groups 

This option allows the re-enabling of User-defined Disablement Groups. The display is identical to the disable 
option. 
 

3.11.4 Enable - Remote 

Information on the detectors connected to the panel and on the condition of all zones can be obtained with an 
ipGateway interface. 

In addition, the user can be assisted with operations such as disabling / enabling a detector from external 
commands over a TCP/IP system. In order to ensure this only happens with the consent of the user the 
REMOTE option must be enabled by the user. 

If the current User ID does not have the necessary permission, the display prompts for entry of a password to 
guard against inadvertent changes.  

After selecting the option, a selection list is presented on the display as follows: 

 

 [Remote Access Options]

 

 DISABLE REMOTE ACCESS 

 ALLOW REMOTE ACCESS       

 

 

Use the 



 buttons to highlight the required option and then press the 

 button to confirm. 

 

www.acornfiresecurity.com

www.acornfiresecurity.com

Содержание MX-5101












































Отзывы: