Advanced Card ACR39x, Справочное руководство

Страница: 15 / 35

ACR39x – Reference Manual
info@acs.com.hk
Version 1.03
www.acs.com.hk
Page 15 of 35
Offset Field Size Value Description
14 bClockStop 1
ICC Clock Stop Support:
00h – Stopping the Clock is not allowed
01h – Stop with Clock signal Low
02h – Stop with Clock signal High
03h – Stop with Clock signal either High or
Low
Protocol Data Structure for Protocol T=1 ( dwLength =00000007h)
Offset Field Size Value Description
10 bmFindexDindex 1
B7-4 – FI – Index into the Table 7 in
ISO/IEC 7816-3:1997 selecting a clock rate
conversion factor.
B3-0 – DI – Index into the Table 8 in
ISO/IEC 7816-3:1997 selecting a baud rate
conversion factor.
11 bmTCCKST1 1
B7-2 – 000100b
B0 – Checksum type (b0=0 for LRC, b0=1
for CRC)
B1 – Convention used (b1=0 for direct, b1=1
for inverse)
Note: The CCID ignores this bit.
12
bGuardTimeT1
1
Extra guard time (0 to 254 etu between two
characters). If value is FFh, then the guard
time is reduced by 1 etu.
13 bWaitingIntegerT1 1
B7-4 – BWI values 0-9h valid
B3-0 – CWI values 0-Fh valid
14 bClockStop 1
ICC Clock Stop Support:
00h – Stopping the Clock is not allowed
01h – Stop with Clock signal Low
02h – Stop with Clock signal High
03h – Stop with Clock signal either High or
Low
15 bIFSC 1 Size of negotiated IFSC.
16 bNadValue 1 00h Only support NAD=00h.
The response to this message is the RDR_to_PC_Parameters message.