Advanced Card Systems AET63 BioTRUSTKey, Справочное руководство

Страница: 23 / 29

AET63 Reference Manual version 1.8 September 2006
 Advanced Card Systems Ltd. Page 23 of 29
CLA APDU instruction class byte
INS APDU instruction
P1 APDU parameter byte 1
P2 APDU parameter byte 2
Lc APDU command data length
BYTE x APDU command data
Le Expected APDU response data length (Le = 0 means no data is expected from the card)
NOTE - With the T=0 communication protocol it is not possible to transmit data to the card and from the card in a single command-
response pair. Hence, only either Lc or Le can be greater than 0 in an EXCHANGE_APDU command when a T=0 card is in the reader.
If both parameters have a value greater than 0, the AET63 does not execute the command and returns an error status.
Response data format
BYTE
1
... ... BYTE
N
SW1 SW2
BYTE x Response data from card (if any)
SW1, SW2 Status code returned by the card.
8.4.4 EXCHANGE_T1_FRAME
To exchange an APDU (Application Protocol Data Unit) command/response pair between the MCU card
inserted in the AET63 and the host computer using T1 protocol.
Command format
Instruction Code Data length Data
LEN T1 BLOCK FRAME
A1
H
LEN Length of APDU command data, N
DATA T1 Block frame to be sent to the card
Response data format
BYTE 1 ... ... BYTE N
BYTE x Response T1 Block from card (if any)