Advanced Card Systems ACR3901U-S1, Справочное руководство

Страница: 73 / 96

ACR3901U-S1 – Reference Manual
info@acs.com.hk
Version 1.09
www.acs.com.hk
Page 73 of 96
Each byte specified in the command is used in the card to compare the byte stored in a specified
address location. If the data match, the corresponding protection bit is irreversibly programmed to ‘0’.
Command Format ( abData field in the PC_to_RDR_XfrBlock )
Where:
MSB Byte Address = 0000 00A
9
A
8
b is the memory address location of the memory card
LSB Byte Address = A
7
A
6
A
5
A
4
A
3
A
2
A
1
A
0
b is the memory address location of the memory
card
MEM_L Length of data to be written to the memory card
Byte x Byte values to be compared with the data in the card starting at Byte
Address . BYTE 1 is compared with the data at Byte Address; BYTE
N is compared with the data at (Byte N-1).
Response Data Format ( abData field in the RDR_to_PC_DataBlock )
SW1 SW2
Where:
SW1 SW2 = 90 00h if no error
7.2.5.7. PRESENT_CODE_MEMORY_CARD (SLE4428 and SLE5528)
This command is used to submit the secret code to the memory card to enable the write operation
with the SLE4428 and SLE5528 card, the following actions are executed:
1. Search a ‘1’ bit in the presentation error counter and write the bit to ‘0’.
2. Present the specified code to the card.
3. Try to erase the presentation error counter.
Command Format ( abData field in the PC_to_RDR_XfrBlock )
Pseudo-APDU
CLA INS P1 P2 MEM_L
CODE
Byte 1 Byte 2
FFh 20h 00h 00h 02h
Where:
CODE Two bytes secret code (PIN)
Pseudo-APDU
CLA INS
Byte Address
MEM_L Byte 1 .... .... Byte N
MSB LSB
FFh D1h