38
Naída CI Sound Processor User Guide
the FM transmitter to assess audio quality.
b.
If you select Wireless, you will be listening to whatever audio source is being streamed
through the ComPilot (i.e. Bluetooth device, FM, battery-operated device, etc.). To begin
the process, have the ComPilot turned on and the desired source streaming. It is a good idea
to turn the volume down on any device that is directly connected to the ComPilot. If listening
to FM input, connect the wireless FM receiver to the Europort located on the ComPilot
and synchronize it with the FM transmitter. Provide input to the FM transmitter to assess
audio quality.
To close the Naída CI Listening Check when
not in use, remove the earbuds and grasp
the grip indents on the side of the Naída
CI Listening Check with one hand while
grasping the processor and battery interfaces
with the other hand. Carefully pull your
hands apart until the two pieces disconnect.
Turn one piece 90 degrees, aligning the
AB logo piece to slide into the other piece.
12
13
Once the listening check is complete,
disconnect the module from the battery.
Remove the processor from the module.
Reconnect the battery to the processor,
and select the desired settings for use.
10
11
