Advance Tube Technology OP128, Инструкция по эксплуатации

Страница: 5 / 8

Power ( phantom connection )
OP128 power is supplied by an adaptor of 9vcc 300mA.
The plug must be 2,5mm coaxial with the negative pole in
the center.
*Se If the power supply into the package is a “universal” type, please
follow the instructions of the attachment very carefully.
Phantom Power
Through the 7 poles MIDI cable it is possible to power
the foot pedal by phantom.
In the scheme there is an example of phantom power
connection using a S640 MIDI SWITCHER.
Anyway it is possible to perform this connection with
many other units which adopt this “standard” connection
(multi effect, preamp, etc)
MADE IN ITALY
9 VDC
MIDI SETUP
MIDI OUTPUT
Advance
TUBE TECHNOLOGY
R
( PHANTOM POWER )
MIDI CONTROLLER
OP128
DIN 7P
Midi out
Midi in
Midi thru
Power supply for OP128
Midi Devices
0 1 2 3 4
6
7
8 9 5
MIDI PROGRAM
Advance
TUBE TECHNOLOGY
R
10
+
10
-
MIDI CONTROLLER
OP128
SW1 SW2 SW3 SW4 SW5 MIDI IN
PHANTOM OUT
MIDI THRU PHANTOM
INPUT
12VCC
500mA
Advance
TUBE TECHNOLOGY
MADE IN ITALY
SERIAL#
MIDI SWITCHER
S640
R
AUX CONNECTION