STEP 4:
Clean with proper cleaning/
sanitation products
(Figure 4)
.
Reverse steps to reassemble.
NOTE:
Be sure to activate and
rinse a few times to remove
extra chemicals and cleaning
agents.
STEP 2:
Remove the inner grate:
Place s small screwdriver through
a hole in the grate, into the drain
hole of the rinser to hold the
grate in place and prevent it from
spinning (
Figure 2)
.
STEP 3:
While holding the screwdriver in
position, use a 18 mm or 3/4”
adjustable wrench to turn the
spray head counter-clockwise to
loosen and remove (
Figure 3)
.
3
(
Figure 2)
(
Figure 3)
(
Figure 4)
